Dry Construction
... perfect for both - new and existing buildings
Flexible in the system with one insulation panel type
Whether it be for new construction or renovation plans: the Roth Dry Construction System will convincingly meet the widest array of requirements. Only one single system panel type is required for laying the insulation. This ensures simple, secure and timesaving nstallation and allows for flexibility in the layout, even with difficult room situation. The low installation height and the low mass per unit area redestines the use of the Roth Dry Construction System, particularly for handling in buildings undergoing renovation. The height of the Roth TBS system panel is only 33 mm. This means that the entire installation height for the floor structure falls between 48 mm and 59 mm, depending on the load-distribution layer used. The installation on the wall, including dry-mounted boards, amounts to 46 mm. Together with the diffusion-proof and dimensionally stable Roth Alu-Laserflex 14 mm system heating pipe, you have a system of parts which works optimally with one another.
Manifold in utilisation – also optimal as wall heating
The Roth Dry Construction System is suitable for a large number of applications. The Roth TBS system panels can be fastened directly to the wall for the installation of wall heating. After the Roth heat conducting segments have been applied, the Roth Alu-Laserflex system heating pipes are placed in a meandering pattern rising up the wall. The dry element installation set-up is mounted to this structure after application of the PE film.
Whether it be for new construction or renovation plans: the Roth Dry Construction System will convincingly meet the widest array of requirements. Only one single system panel type is required for laying the insulation. This ensures simple, secure and timesaving nstallation and allows for flexibility in the layout, even with difficult room situation. The low installation height and the low mass per unit area redestines the use of the Roth Dry Construction System, particularly for handling in buildings undergoing renovation. The height of the Roth TBS system panel is only 33 mm. This means that the entire installation height for the floor structure falls between 48 mm and 59 mm, depending on the load-distribution layer used. The installation on the wall, including dry-mounted boards, amounts to 46 mm. Together with the diffusion-proof and dimensionally stable Roth Alu-Laserflex 14 mm system heating pipe, you have a system of parts which works optimally with one another.
Manifold in utilisation – also optimal as wall heating
The Roth Dry Construction System is suitable for a large number of applications. The Roth TBS system panels can be fastened directly to the wall for the installation of wall heating. After the Roth heat conducting segments have been applied, the Roth Alu-Laserflex system heating pipes are placed in a meandering pattern rising up the wall. The dry element installation set-up is mounted to this structure after application of the PE film.
