Maintenance of underfloor heating systems: Tips for long service life and efficiency


A well-maintained underfloor heating system can provide optimal performance and energy efficiency for many years. Here are some key tips to ensure that your Roth underfloor heating system runs smoothly:

  1. The right water temperature: The underfloor heating system should be kept between 30 and 45°C to prevent damage and ensure efficient heat distribution.
     
  2. Ventilate the system: To avoid interference, flush and ventilate the system regularly to remove any trapped air.
     
  3. Balancing the distributor: The underfloor heating distributor must be adjusted to balance the water flow to each loop, ensuring even heat distribution throughout the system. The adjustment should be carried out according to the calculations made for the specific needs of the building, floor covering and other factors.
     
  4. Regular control system checks: Check that all thermostats and control systems are working properly. If the thermostats are not working properly, it can result in uneven temperatures in different rooms. Roth control systems, such as the Roth Touchline®, are equipped with modern features that allow them to be monitored and adjusted easily via app or wireless control unit.
     
  5. Check the heat source: Make sure that the heat pump, boiler, or district heating used as a heat source is working and can supply enough energy to the system.
     
  6. Preventative measures: Regularly check the pressure in the system (should be between 1 and 1.5 bar) and ensure that the pump is working properly. Roth energy-efficient pumps have built-in features that make maintenance easier.
     
  7. Exercise the system during the off-season: During periods when the underfloor heating is not in use, such as during the summer, it is important to exercise the system by temporarily turning it on to avoid parts getting stuck.
     
  8. Troubleshooting: In the event of any malfunctions, such as thermostat failure, weak pump, or blocked water flow, the system should be scanned according to the manufacturer's guidelines or a professional HVAC technician should be contacted.

By following these maintenance tips, you can ensure that your Roth underfloor heating system continues to deliver a pleasant indoor environment and lasts longer with optimal efficiency.