Roth knob system - flexible, easy, perfect

An extremely flexible system
The Roth Knob System is characterised by a high degree of flexibility and straightforward assembly. The undercut and ideal shape of the knobs enables Roth DUOPEX S5® and X-PERT S5®+ system pipes in sizes of 14 to 17 mm to be attached to Roth knob panels (which also come in sizes of 14 to 17 mm). The pipes can be laid either orthogonally or – with the aid of an additional film – diagonally. Fixing strips mean that leftover pieces can easily be reused, enabling you to create environmentally-friendly installations with very little waste. Filler knob panels are available too. The Roth Knob System is suitable for laying in residential, office and commercial buildings.        

Roth knob panel 14 – 17 DEO 10
Roth offers a knob panel with high loadbearing capacity and low installation height for use in buildings with increased stress requirements. The special geometry of the knob and its alignment on the entire Roth knob panel offers the perfect base for the placement of the Roth system heating pipes – even with low exterior temperatures. The Roth knobs interlock with one another respectively by means of two-sided foil protrusion. The best prerequisites for utilisation of flow screed. Without the use of additional tools, the Roth System heating pipe is pressed with the foot into the knob, where it audibly and securely engages. Suitable for all Roth system pipes of ø 14 mm to ø 17 mm. The two-layer polystyrene construction ensures the knobs can be walked on, whilst also providing thermal insulation. The Roth manifold connection knob makes possible unproblematic adjustment of laying distances in the area of the manifold in accordance with distributor connections. The area of the door between two rooms is simply to be bridged with the Roth compensation knob in connection with the Roth compensation knob foil. The foil of the Roth edge insulation strip is to be pressed into the Roth knob with the Roth PE profile. An ideal solution, even with the utilisation of flow estrich. When every millimetre of installation height counts: the Roth knob panel 14 – 17 DEO 10 can even be used when renovating residential buildings        

Well-engineered right down to the last detail
Roth system heating pipes can be laid diagonally to accommodate unusual floor plans. There is no need for additional installation aids.

At a glance

  • Suitable for all Roth system pipes with ø 14 mm to ø 17 mm
  • Available in two EPS qualities: EPS DES 30-2 (1450 x 950 x 50 mm) and EPS DEO 10
  • (1450 x 950 x 30 mm)
  • Support plate and cover film made of polystyrene, building material class B2
  • Knob grid of 50 mm: all placement intervals and shapes possible within the 50 mm grid
  • Effective laying area/panel: 1,26 m²
  • Assembled into a single unit ex-works
  • Overlap on two sides so that elements can be interconnected
  • Footfall noise is reduced
  • The 4 mm undercut and the geometry of the individual knobs make it easy to install
  • and secure pipes in place
  • The foam on the back of each individual knob creates an extremely stable laying
  • surface which is good to walk on
  • The diagonal fixing method makes it easier to lay Roth system pipes in this way