Roth Original Tacker® system - professional system solutions for top results

Roth Original Tacker® System – for solutions that retain their value
A system solution whose components are designed to work together in perfect harmony provides the basis for mastering sophisticated heating construction tasks. The Roth Original Tacker® System (which has proven its worth a million times over) used in conjunction with Roth DUOPEX S5® and X-PERT S5®+ system pipes provides the ideal foundation for creating a heating supply system that will retain its value in the long term. The friction-free interlocking comprehensive connection of pipe and patented pipe laying technique is therefore always the first choice for the entire array of sophisticated applications. Perfection in the result, whether it is for residential, office or industrial construction projects.       

Three system steps to perfection
The high-quality ex-works prefabrication of all system components – pipe, composite panel and accessories – makes it possible: the complete Roth radiant heating and cooling system is laid in only three work steps using the patented Tacker technique. Of course, everything is in accordance with a precise computer calculation and taking into account all valid regulations.

Roth radiant heating and cooling – comfort can be so simple
Fase of assembly with a high degree of flexibility, paired with operational and building site safety and superior efficiency, characterise Roth radiant heating and cooling systems – even with unusual floor plans. The Roth Original Tacker® System makes assembly really simple and enables pipes to be positioned to the centimetre, with a view to achieving optimum heat distribution and cooling, even in the most difficult installation situations. The underfloor constructions of Roth radiant heating and cooling systems conform to DIN EN 1264 ("Water based floor heating"), taking into account DIN 18560 ("Floor screeds in building construction"), DIN 4109 ("Sound insulation in buildings") and the Energieeinsparverordnung (Energy Savings Regulation [EnEV]). The consistently high quality standards of the individual components and of the overall system are documented by a large number of marks of testing, monitoring and quality.

System composite panel for radiant heating and cooling systems
Simple, fast, in compliance with standards: system composite panels made of polystyrene particle foam. An excellent choice for heat and sound insulation. They provide a self-enclosed space at the blink of an eye during the pipe laying stage. This makes it possible to have a two-sided, self-adhesive overlap that is 30 mm wide. A secure closure against damp and screed (in accordance with DIN 18560) prevents sound and thermal bridges from forming. In addition, an imprinted grid makes it easier to put the system pipes exactly in place in accordance with precisely calculated laying distances.

A strong solution for high stresses
The Roth EPS 30 SE 26 mm system composite panel comes into play wherever traffic loads are high (in car showrooms, for example). This composite panel or panel combination can be utilised under an appropriately coordinated screed construction with maximum traffic loads of up to 35 kN/m². The Roth range of products also includes
additional insulation panels made of EPS or PU, which may be needed depending on the thermal insulation requirements of the application in question.

Roth Ex system composite panel – strong insulating effect and flat design
The new EPS DES 25-2 WLG 032 Ex system composite panel with multiple energy benefits reduces the build height of the floor by up to 10 mm compared to standard insulating panels with sound impact insulation. Thanks to its thermal conductivity group (032), the Neopor insulating material enables reduced insulating strengths combined with sound impact insulation. Consequently, panel heights of just 25 mm are sufficient to insulate ceilings between living quarters in accordance with the regulations.