Roth shunt 3-way with weather compensation
he heating standard DS 469 requires automatic control of the flow temperature according to the heat demand. In practice, this means that central heating systems without integrated weather compensation in the heat source must be mounted with weather compensation. This also applies to underfloor heating systems.
The Roth shunt 3-way with weather compensation is simple to operate and provides a quick overview of temperatures and operating status via the display. Roth shunt 3-way with weather compensation comes with integrated valve for balancing the primary flow and Wilo Para pump 15-130/6. The Roth shunt 3-way with weather compensation has a capacity of approx. 240 m² and of course fits directly on Roth floor heating distributors.
Complete with outdoor sensor, flow sensor and engine valve.
Downloads
Roth 3-way Shunt Unit
Roth UFH manifold 1" 2-12 ends
with/without Flow Meter
Roth shunt, 3-way valve
Roth UFH manifold 1" 2-12 ends
with/without Flow Meter
Wilo Para pumps
Technical data
| Roth shunt - 3 way thermostat/ weather compensato | UK NO. 7466210228 |
| Max. operating temperature | Max. 80°C on prim. side |
| Max. differential pressure | 50 kPa |
| Max. operating pressure | 6 bar |
| Wilo Pump | PARA MS15/6 - 43/SC-12 |
| Pump output | 3 - 43W |
| Regulation range | 20-60°C +/- 5°C |
| Primary side connection | EURO ¾” external |
| Union for manifold | 1” internal |
| Material | Brass CW614 |
| Gasket | EPDM |
| Medium | Water containing up to 50% glycol |
| Electrical connection | 230V with earthing |
Roth insulation for Roth shunt
Roth insulation is easy and practical to put on the Roth shunt and ensures a nice finish of the underfloor heating installation. Roth insulation has cutting lines that make it easy to customize it if you need to shorten it.
Roth insulation is prepared for installations with the pump mounted on the left, but can easily be changed if the pump is desired on the right side. For larger plants with shunter, you can extend with our universal insulation jacket for distributor pipes.
Roth insulation for Roth shunt with distributor up to 3 branches, plumbing no. 401973.892. Roth insulation for Roth ShuntUnit with up to 6 branches, plumbing no. 401973.891.
- Perfectly suited for shunt with both thermostatic valve and road compensation plant
- Can be easily cut with a knife when using the cutting lines
- Meets the requirements of DS 452
- The pump can be mounted both on the left and right
- Strong material that does not crack
- Contains flame retardant material
- Nice finish on the underfloor heating installation
- Delivered fully assembled - ready for installation