Roth shunt with thermostatic valve
Roth shunt with thermostatic valve comes with Wilo Para pump 15-130/6. The pump and shunt are designed for systems of up to 240 m², however, depending on the current heat loss and choice of pipe dimensions. Roth shunt with thermostatic valve
is equipped with thermostatic valve that allows setting the flow temperature in the range of 25 - 60 °C.
The thermostat can be locked. The Roth underfloor heating shunt is left-hung, but can easily be flipped and converted to right-hung.
Roth shunt with thermostatic valve comes complete with thermometer, gaskets, thermostat, pre-setting key and pump.
Downloads
Roth UFH manifold 1" 2-12 ends
with/without Flow Meter
Roth shunt
Roth shunt, thermostatic valve
Wilo-Para pumps
Technical data
| Roth shunt - 2 way thermostat | UK NO. 7466210040 |
| Max. operating temperature | Max. 80°C on prim. side |
| Max. differential pressure | 50 kPa |
| Max. operating pressure | 6 bar |
| Wilo Pump | PARA MS15/6 - 43/SC-12 |
| Pump output | 3 - 43W |
| Regulation range | 20-60°C +/- 5°C |
| Primary side connection | EURO ¾” external |
| Union for manifold | 1” internal |
| Material | Brass CW614 |
| Gasket | EPDM |
| Medium | Water containing up to 50% glycol |
| Electrical connection | 230V with earthing |
Roth insulation for Roth shunt
Roth insulation is easy and practical to put on the Roth shunt and ensures a nice finish of the underfloor heating installation. Roth insulation has cutting lines that make it easy to customize it if you need to shorten it.
Roth insulation is prepared for installations with the pump mounted on the left, but can easily be changed if the pump is desired on the right side. For larger plants with shunter, you can extend with our universal insulation jacket for distributor pipes.
Roth insulation for Roth shunt with distributor up to 3 branches, plumbing no. 401973.892. Roth insulation for Roth ShuntUnit with up to 6 branches, plumbing no. 401973.891.
- Perfectly suited for shunt with both thermostatic valve and road compensation plant
- Can be easily cut with a knife when using the cutting lines
- Meets the requirements of DS 452
- The pump can be mounted both on the left and right
- Strong material that does not crack
- Contains flame retardant material
- Nice finish on the underfloor heating installation
- Delivered fully assembled - ready for installation