Roth wireless control for a room is a complete solution for regulating a single room. The wireless control makes installation simple - both for new construction and for renovation tasks where it can be difficult to draw wires.
The wireless installation increases the choice when it comes to placing the room thermostat and valve. The valve is 1/2" with sleeve and bypass.
When renovating individual rooms, such as bathrooms, utility rooms, conservatories, annexes, etc., waterborne underfloor heating is often rejected, as it can be both a complicated and expensive solution. By using Roth RTL valves as flow and temperature control on the underfloor heating circuit, it becomes a much more energy-efficient and cheaper alternative to electric floor heating solutions.
The Roth RTL valve is mounted on the underfloor heating return, where it measures the media temperature and regulates the flow to the set temperature between 10°C and 50°C. In addition to regulation according to the media temperature, Roth RTL valves are provided, also with various options for regulation according to the room temperature. Roth offers two solutions; one with the thermostat mounted with or without capillary sensor on the Roth RTL valve body. For this solution, electrical connections are not required. Alternatively, it can be supplied with a pre-wired or wireless room thermostat.
The solution can be mounted on an already existing radiator/heating system. An easy, fast and economical solution for both you as an installer and your customers.
Roth develops, manufactures and markets complete floor heating systems of high and consistent quality. When you use a complete Roth underfloor heating solution in combination with the Roth RTL valve, you can be sure that everything fits together, the solution has been tested and approved as a single system. It gives you a faster work process and high quality.
The Roth RTL valve meets the requirements for comfort heating in small indoor bathrooms, even without room temperature control. In addition, installation is made very easy and comes with mounting screws. The insulation meets the requirements of the insulation standard DS452. In addition, the included insulation is part of the packaging and thus reduces the cost of disposing of packaging.
Roth RTL valve Regulates the Underfloor heating only according to the return temperature from the underfloor heating circuit. Can be used on systems wehre there are no requirements for room temperature control. | Roth RTL valve with room temperature | Roth RTL valve with wireless room thermostat Regulates the underfloor heating according to the return temperature from the floor heating circuit and a desired room temperature set on the room thermostat. 17401966.206 | Roth RTL valve with room temperature thermostat with capillary sensor |
Downloads
